RL804GC

Key Benifits and Features

Mature Gigabit GPON Technology
High cost performance, high reliability and easy maintenance
The QoS of different services is guaranteed

RicherLink RL804GC Router Overview

RL804GC terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators or cable operators. The box is based on the mature Gigabit GPON technology, which have high ratio of performance to price, They are highly reliable and easy to maintain, with guaranteed QoS for different service. And It is fully compliant with technical regulations such as ITU-T G.984.x and technical requirement of GPON Equipment from China Telecom.

Figure 1: RicherLink RL804GC Router

Description RL804GC equipment Interface

Port Type	Function
RF	CATV RF output port, connect a TV or set-top box via this interface.
CATV	Support SC / APC optical pigtail connector for CATV access networks PON + CATV three wavelength signals.
LAN port	RJ45 Port connects to local internet,1 GE port and 1 FE port automatically
Reset button (RST)	Press down reset button and keep 5 seconds to make the device restart and recover from the factory default Settings.
PWR port (DC12 V)	Connect with power adapter
Power turn on/off	Power turn on/off

RL804GC LED statement

Indicators	status	Description
POWER	Light on	ONU power supply normally
POWER	Light off	ONU no power supply
RF	Light on	CATV optical receiver output level normal
RF	Blink	CATV optical receiver output level lower than normal or failure
CATV	Light off	CATV optical receiver signal normal
CATV	Blink	CATV optical signal power rate over normal or less than normal status
PON	Light on	ONU link active
	Blink	ONU manage to link
	Light off	ONU receiving power rate lower than optical receiver sensitivity
LOS	Blink	Device does not receive optical signals.
LOS	Light off	Device has receivedoptical signal.
LAN1-LAN4	Light on	network port linked, but no data transmitting
	Blink	network port data pass
	Light off	ONU no power supply or internet cable unlink
SYS	Green	PON module power supply
SYS	Orange	System start normally

RL804GC specification and working environment

Parameter	Nominal
Dimension	180mm×148mm×30mm（L×W×H）
Net weight	0.25kg
Typical power consumption	<7W
Noise	None
Cooling style	Naturally cooling
Power supply	12V DC（By external AC/DC adapter）
Installation style	Support PC, wall mount or put inside of information box.
Environment	-5~50℃
Atmospheric pressure	70~106Kpa
MTBF	50,000hours
MTTR	30minutes

RL804GC GPON Interface

Parameter	Nominal
Connector style	SC/APC
PON quantity	1
Fiber style	Single mode
Wavelength	TX：1310 +/-20nmRX：1490 +/-10nm
PON interface standard	ITU-T G.984.2/ITU-T G.984.3/ITU-TG.988 Class B+
PON interface receiving rate	2.488Gpbs
PON interface transmitting rate	1.244Gpbs
Output optical power	Min: 0.5dBm Max: +5dBm
Opticalreceiver sensitivity	Precede -29dBm
The length of the optical link	Max 20km

RL804GC CATV optical receiver parameter

Item			Unit	Parameter
Optical parameter	Receivingoptical wavelength		nm	1200～1650
	Receiving optical power		dBm	-18～+2
	Reflection loss		dB	≥50
	Connector		–	SC/APC
	Fiber type		–	Single mode
	Isolation (WDM)	Forward channel	dB	≥40
		Reflection channel	dB	≥22
RF parameter	Frequency		MHz	45 ～ 1000
	In-band flatness		dB	±1
	Output reflection loss		dB	≥14
	Nominal output level		dBuV	=76±1 （AGC range：-12～ -2dBm）
	Attenuation range		dB	-18—0
	C/N		dB	≥ 46
	C/CTB		dB	≥ 65
	C/CSO		dB	≥ 65
	Output impedance		Ω	75
Others	Power supply（DC）		V	12
	Power consumption		W	≤1.5
	Working temperatureStorage temperature		℃℃	0 ～ +45
				-40～ +75
	Relative humidity		%	Maximum 95% non-condensing

WIFI GPON ONU Router Netwoking

Ordering Information

Model	Product Description
RL804GC	GPON ONU 4GE+2POTS+11n 22 +11ac 22+USB, 4 x External Antennas 5DBI

Product Inquiry